Compact unit

    كود المنتج
    1503563
    بلد الصنع
    المملكة المتحدة
    متوفر في المخزن
    0 جم
    الوصف
    تدفق الصفحي تدفق الهواء الإعداد الرقمي وعرض درجة الحرارة مريحة فتح الباب التصاعدي الفولاذ المقاوم للصدأ الداخلية ضمان سنة

     

    Ideal for microtitre plates and Petri dishes
    Laminar flow air circulation
    Digital setting and display of temperature
    Convenient upward opening door
    Stainless steel interior

    Specially designed for use with microtitre plates, which can be difficult to incubate. In conventional incubators, when 4 or more plates are placed on a shelf, they block the air circulation, which can seriously impair temperature distribution.

    The Stuart SI19 Incubator overcomes this problem with forced air circulation, which blows preheated air across the shelves rather than just through them. Microtitre plates are also prone to drying out during incubation. The SI19 overcomes this with a water tray to increase the humidity within the chamber.

    The bright LED display indicates temperature and the encoder control allows rapid and accurate temperature setting. An integral over-temperature protection system automatically tracks the set temperature and controls the heater in the event of a fault. Error codes are displayed if a fault has occurred or if the set temperature has been interrupted.

    An acrylic upwards opening door provides excellent access to the interior. The stainless steel chamber features 4 shelves each accommodating 6 plates (or 12 stacked in 2 layers). Shelves are captive and slide out for easy loading.

    Microtitre plate incubator, SI19

     

    Nominal capacity 20 litres
    Temperature range Ambient + 8°C to 80°C
    Temperature fluctuation (at 37°C) ±0.5°C
    Temperature variation ±0.5°C
    Display type LED
    Display resolution 0.1°C
    Internal dimensions (w x d x h) 250 x 230 x 200mm
    Overall dimensions (w x d x h) 380 x 380 x 435mm
    Net weight 24kg
    Electrical supply 230V, 50Hz, 280W
    مواصفات المنتج
    بلد الصنعالمملكة المتحدة
    Description

     

    Ideal for microtitre plates and Petri dishes
    Laminar flow air circulation
    Digital setting and display of temperature
    Convenient upward opening door
    Stainless steel interior

    Specially designed for use with microtitre plates, which can be difficult to incubate. In conventional incubators, when 4 or more plates are placed on a shelf, they block the air circulation, which can seriously impair temperature distribution.

    The Stuart SI19 Incubator overcomes this problem with forced air circulation, which blows preheated air across the shelves rather than just through them. Microtitre plates are also prone to drying out during incubation. The SI19 overcomes this with a water tray to increase the humidity within the chamber.

    The bright LED display indicates temperature and the encoder control allows rapid and accurate temperature setting. An integral over-temperature protection system automatically tracks the set temperature and controls the heater in the event of a fault. Error codes are displayed if a fault has occurred or if the set temperature has been interrupted.

    An acrylic upwards opening door provides excellent access to the interior. The stainless steel chamber features 4 shelves each accommodating 6 plates (or 12 stacked in 2 layers). Shelves are captive and slide out for easy loading.

    Microtitre plate incubator, SI19

     

    Nominal capacity 20 litres
    Temperature range Ambient + 8°C to 80°C
    Temperature fluctuation (at 37°C) ±0.5°C
    Temperature variation ±0.5°C
    Display type LED
    Display resolution 0.1°C
    Internal dimensions (w x d x h) 250 x 230 x 200mm
    Overall dimensions (w x d x h) 380 x 380 x 435mm
    Net weight 24kg
    Electrical supply 230V, 50Hz, 280W
    Short Descriptionتدفق الصفحي تدفق الهواء الإعداد الرقمي وعرض درجة الحرارة مريحة فتح الباب التصاعدي الفولاذ المقاوم للصدأ الداخلية ضمان سنة
    Write Your Own Review
    أرسل لنا تقييمك: Compact unit
    رأيك يهمنا