Hotplate stirrers, digital
الإعداد الرقمي والتحكم في كل من درجة الحرارة والسرعة
الموردة كاملة مع التحقيق في درجة الحرارة لمراقبة دقيقة من درجة حرارة السائل
ميزات السلامة المتقدمة:
- وامض "حار" ضوء تحذير
- دائرة أمان مستقلة للحماية من ارتفاع درجة الحرارة
اختيار الألمنيوم القوي أو قمم السيراميك المقاومة كيميائيا
ضمان سنة
Digital setting and control of both temperature and speed
Supplied complete with temperature probe for accurate control of liquid temperature
Advanced safety features:
- Flashing "Hot" warning light
- Independent safety circuit to protect against overheating
Choice of robust aluminium or chemically resistant ceramic tops
Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time.
As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimize overshoot and time to set point. An audible alert sounds when the set temperature has been reached.
Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight. Internal electronic components are protected against corrosion with a special coating.
Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful magnets and motor give stirring speeds up to 1300 rpm and volumes up to 15 litres*. Stirring speed is set and displayed digitally so that exactly the same speed can be used each time for reproducibility.
If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides and microarrays and specialist electronics.There are two models to choose from:
Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times.
Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature.
stirrers & stirrer hotplates
Supplied complete with temperature probe for accurate control of liquid temperature
Advanced safety features:
- Flashing "Hot" warning light
- Independent safety circuit to protect against overheating
Choice of robust aluminium or chemically resistant ceramic tops
Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time.
As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimize overshoot and time to set point. An audible alert sounds when the set temperature has been reached.
Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight. Internal electronic components are protected against corrosion with a special coating.
Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful magnets and motor give stirring speeds up to 1300 rpm and volumes up to 15 litres*. Stirring speed is set and displayed digitally so that exactly the same speed can be used each time for reproducibility.
If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides and microarrays and specialist electronics.There are two models to choose from:
Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times.
Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature.
stirrers & stirrer hotplates
| CD162 | SD162 | |
|---|---|---|
| Plate material | Glass ceramic | Aluminium silicon alloy |
| Plate dimensions, mm | 160 x 160 | 160 x 160 |
| Heated area, mm | 120 x 120 | 160 x 160 |
| Heater power, W | 500 | 700 |
| Display resolution °C | 1 | 1 |
| Max. plate temp. °C with probe °C | 450 | 300 |
| Stirrer speed | 200 | 200 |
| Control accuracy with probe °C | ±0.5°C | ±0.5°C |
| Stirrer speed, rpm | 200 to 1300 | 200 to 1300 |
| Max. stirring capacity, litres | 15 | 15 |
| Net weight, kg | 3.4 | 3.4 |
| Overall dimensions (w x d x h) | 190 x 300 x 110 | 190 x 300 x 110 |
| Electrical supply | 230V, 50Hz | 230V, 50Hz |
| Model | Description |
|---|---|
| CD162 | Digital stirrer/hotplate, ceramic plate, 500W |
| SD162 | Digital stirrer/hotplate, aluminium plate, 700W |
| CD162/1 | Temperature probe, stainless steel |
| SR1 | Retort rod, 600 x 12mm |
| Short Description | الإعداد الرقمي والتحكم في كل من درجة الحرارة والسرعة الموردة كاملة مع التحقيق في درجة الحرارة لمراقبة دقيقة من درجة حرارة السائل ميزات السلامة المتقدمة: - وامض "حار" ضوء تحذير - دائرة أمان مستقلة للحماية من ارتفاع درجة الحرارة اختيار الألمنيوم القوي أو قمم السيراميك المقاومة كيميائيا ضمان سنة | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Description |
Digital setting and control of both temperature and speed
Supplied complete with temperature probe for accurate control of liquid temperature Advanced safety features: - Flashing "Hot" warning light - Independent safety circuit to protect against overheating Choice of robust aluminium or chemically resistant ceramic tops Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time. As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimize overshoot and time to set point. An audible alert sounds when the set temperature has been reached. Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight. Internal electronic components are protected against corrosion with a special coating. Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful magnets and motor give stirring speeds up to 1300 rpm and volumes up to 15 litres*. Stirring speed is set and displayed digitally so that exactly the same speed can be used each time for reproducibility. If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides and microarrays and specialist electronics.There are two models to choose from: Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times. Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature. stirrers & stirrer hotplates
|
كتابة مراجعتك