PFP7 Industrial Flame Photometer

    كود المنتج
    1504029
    بلد الصنع
    United Kingdom
    متوفر في المخزن
    0 جم
    الوصف
    • Designed for industrial analysis • Supplied with Na, K, Li, Ba and Ca filters • Low temperature, single channel • Flame failure safety system • Operates with propane, butane, natural gas or LPG • 3 year warranty

    The PFP7 is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time.

    Technical Specification

     

    Parameter PFP7
    Range 0 to 199.9ppm
    Limits of detection Na 0.2ppm
    K 0.2ppm
    Li 0.25ppm
    Ca 15ppm
    Ba 30ppm
    Reproducibility <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
    Linearity < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
    Stability < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5%
    Recorder output Nominal 1.00V for a reading of 100.0
    Electrical supply 90-125V or 190-250V @50/60Hz
    Air supply Moisture and oil free, 6 litre/min @ 14psi
    Fuel Propane, butane, natural gas or LPG
    Size (w x d x h) 420 x 360 x 300mm
    Weight 8kg
     

     


    Ordering Information

     

    Part Code Description
    500 701 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (230V/ 50Hz)
    500 731 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (110V/ 60Hz)
    مواصفات المنتج
    بلد الصنعUnited Kingdom
    Description

    The PFP7 is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time.

    Technical Specification

     

    Parameter PFP7
    Range 0 to 199.9ppm
    Limits of detection Na 0.2ppm
    K 0.2ppm
    Li 0.25ppm
    Ca 15ppm
    Ba 30ppm
    Reproducibility <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
    Linearity < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
    Stability < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5%
    Recorder output Nominal 1.00V for a reading of 100.0
    Electrical supply 90-125V or 190-250V @50/60Hz
    Air supply Moisture and oil free, 6 litre/min @ 14psi
    Fuel Propane, butane, natural gas or LPG
    Size (w x d x h) 420 x 360 x 300mm
    Weight 8kg
     

     


    Ordering Information

     

    Part Code Description
    500 701 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (230V/ 50Hz)
    500 731 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (110V/ 60Hz)
    Short Description• Designed for industrial analysis • Supplied with Na, K, Li, Ba and Ca filters • Low temperature, single channel • Flame failure safety system • Operates with propane, butane, natural gas or LPG • 3 year warranty
    Write Your Own Review
    أرسل لنا تقييمك: PFP7 Industrial Flame Photometer
    رأيك يهمنا